Cisco Router Yapılandırma Komutları (Özet Tablo)

Cisco Router Configuration Commands

Set a console password to cisco	Router(config)#line con 0 Router(config-line)#login Router(config-line)#password cisco
Set the telnet password to cisco	Router(config)#line vty 0 4 Router(config-line)#login Router(config-line)#password cisco
Stop console timing out	Router(config)#line con 0 Router(config-line)#exec-timeout 0 0
Set the enable password to [ANOTHER].	Router(config)#enable password [ANOTHER]
Set the enable secret password to [ANOTHER]. This will override the enable password and will be stored encypted within the config file	Router(config)#enable secret [ANOTHER]
Enable an interface	Router(config-if)#no shutdown
To disable an interface	Router(config-if)#shutdown
To add an IP address to a interface	Router(config-if)#ip addr 10.1.1.1 255.255.255.0
To enable RIP on all 192.168.x.y interfaces	Router(config)#router rip Router(config-router)#network 192.168.0.0
Disable RIP	Router(config)#no router rip
To enable IRGP with a AS of 200, to all interfaces	Router(config)#router igrp 200 Router(config-router)#network 192.168.0.0
Disable IGRP	Router(config)#no router igrp 200
Static route the remote network is 192.168.1.0, with a mask of 255.255.255.0, the next hop is 192.168.2.1, at a cost of 3 hops	Router(config)#ip route 192.168.1.0 255.255.255.0 192.168.2.1 3
Disable CDP for the whole router	Router(config)#no cdp run
Enable CDP for he whole router	Router(config)#cdp run
Disable CDP on an interface	Router(config-if)#no cdp enable

Cisco Router Show Commands

View version information	show version
View current configuration (DRAM)	show running-config
View startup configuration (NVRAM)	show startup-config
Show IOS file and flash space	show flash
Shows all logs that the router has in its memory	show log
View the interface status of interface e0	show interface e0
Overview all interfaces on the router	show ip interfaces brief
Display current routing protocols	show ip protocols
Display IP routing table	show ip route
Display access lists	show access-lists

Cisco Router Basic Operations

Enable	Enter privileged mode
Return to user mode from privileged	disable
Exit Router	Logout or exit or quit
Recall last command	up arrow or
Recall next command	down arrow or
Suspend or abort	and and 6 then x
Refresh screen output
Complete Command	TAB

Cisco Router Show Commands

Save the current configuration from DRAM to NVRAM	copy running-config startup-config
Merge NVRAM configuration to DRAM	copy startup-config running-config
Copy DRAM configuration to a TFTP server	copy runing-config tftp
Merge TFTP configuration with current router configuration held in DRAM	copy tftp runing-config
Backup the IOS onto a TFTP server	copy flash tftp
Upgrade the router IOS from a TFTP server	copy tftp flash